IMPORTANT NOTES
Information added or updated since this page went live on March 24, 2015, is in GREEN TEXT below.
Information still to be determined (if any) is in RED TEXT below.
Dates and times that are subject to change at NASA’s discretion are in PURPLE TEXT below.
Last update of this page: September 9, 2016, 9:55 am ET
This page provides student flight experiment teams comprehensive information on flight phase operations for SSEP Mission 7 to the International Space Station. The page features details on preparing the mini-laboratories for flight, incorporation of the mini-labs into the SSEP payload, transport of the payload to the International Space Station, science operations aboard the station, and the return of the mini-laboratories to the student teams for analysis after the flight. The page is divided into the following sections:
1. Critical Timeline for Flight Phase Operations
2. Submission of the Experiment Details Confirmation Form
3. Preparing the Mini-Laboratory for Flight
4. Planning for Return Shipping
5. Shipping the Mini-Laboratory to NanoRacks
6. Transport of the SSEP Payload from Houston to the International Space Station
7. Operations Aboard the International Space Station
8. Conducting the Ground Truth Experiments
9. Receiving the Mini-Laboratory After the Flight
1. Critical Timeline for Flight Phase Operations
Important note: Given the complexity of transporting science payloads to the International Space Station and the discretionary ability of the agencies involved with spacecraft launch and landing to make schedule changes, all student teams are asked to remain flexible. This page will be updated by the SSEP operations team when new information on possible changes to launch and landing dates becomes available. All flight experiment teams are advised to regularly monitor this page.
Nomenclature: During flight phase operations, milestones on the Critical Timeline below are stated in terms of:
- Handover + XYZ Days/Weeks, counted from the time the student teams hand over their flight-ready mini-laboratories to NanoRacks for incorporation into the SSEP payload, or Launch Minus XYZ days/hours.
- After landing, the milestones are given in terms of Return to Earth + XYZ Hours/Days.
Note that these times are stated relative to the scheduled launch and landing, and if there are changes to the schedule, this page will be modified to reflect the new launch and landing dates.
The Critical Timeline for flight phase operations for SSEP Mission 7 to the International Space Station is provided below. All SSEP student experiment teams are required to abide by the following milestones. These milestones are subject to the very fluid nature of launch operations, and should be viewed as a nominal operations profile that is subject to significant change.
T=0, Handover: Deadline for NanoRacks to Receive All Mini-labs from Flight Experiment Teams (Mini-Labs must be loaded with the final Fluid/Solid concentrations and volumes, and shipped according to the Special Handling Requirements as defined on the approved, signed and executed Flight Configuration Agreement)
Once received, NanoRacks will log receipt of shipment, photograph each mini-laboratory, heat seal level 2 and 3 containment bags around each mini-lab, and load the mini-lab into the SSEP Mission 7 Payload.
Current Target: March 17, 2016 (Launch Minus 2.5 Weeks)
- NOTE: NO MINI-LABS WILL BE ACCEPTED AFTER THIS DEADLINE
- NOTE: The NET (No Earlier Than) date for mini-labs to arrive at NanoRacks in Houston is Wednesday, March 2, 2016. NanoRacks will accept delivery of experiments from Wednesday, March 2, 2016 through Thursday, March 17, 2016
- NOTE: While FedEx can drop off a package on Saturday there will be no NanoRacks staff at the office at this time. If the mini-lab requires special handling on arrival, e.g., placed in a refrigerator, the team should ensure that the mini-lab does not arrive on Saturday, March 5th or 12th (see Section 5 below).
T + 15 Days: NASA conducts Human Factors Review of the SSEP Mission 7 Payload
Current Target: April 1, 2016 (Launch Minus Approximately 7 days)
T + 16 Days: SSEP Mission 7 Payload Turned over by NanoRacks to NASA for Vehicle Integration
Point at which, if one mini-lab requires refrigeration, all mini-labs will be refrigerated.
Current Target: April 2, 2016 (Launch Minus Approximately 6 days)
Launch Minus 2 Days: SSEP Mission 7 Payload Loaded into Ferry Vehicle, SpaceX CRS-8 (SpaceX-8)
Current Target: April 6, 2016
T + 22 Days: Launch of SSEP Mission 7 Payload to ISS
Current Target: April 8, 2016 at 4:43 pm
Vehicle: SpaceX-8 Commercial Resupply Mission to the ISS (Falcon rocket, Dragon spacecraft)
T + 25 Days: Payload Transferred from Ferry Vehicle to ISS
Current Target: April 11, 2016 (Launch Plus Approximately 3 Days)
T + 7 Weeks: Ferry Vehicle with SSEP Mission 7 Payload Returns to Earth
Current Target: May 11, 2016 (Launch Plus approximately 33 Days); vehicle: SpaceX-8 Dragon
Return to Earth + (24-60) Hours: SSEP Mission 7 Payload Received by NanoRacks in Houston; Mini-labs Shipped Directly To Experiment Teams
Mini-lab ships as soon as FedEx is open. Shipping will be done as per special handling requirements defined by flight experiment team, e.g., pack mini-lab with cold packs. International experimenters will need to have their mini-lab shipped to a U.S. address such as an embassy or a consulate, or work out other specific arrangements with NCESSE and NanoRacks. Alternatively, they can have a representative pick up their mini-lab in Houston.
2. Submission of the Experiment Details Confirmation Form – COMPLETE
Each student flight experiment team locked down their final flight configuration in preparation for flight on SpaceX-7. Teams are bound by the signed and executed Flight Configuration Agreement completed at that time. The flight team, NCESSE, and NanoRacks are in full agreement on the final flight experiment details regarding: 1) the fluids and solids to be used (specific volumes and concentrations), 2) the specified Crew Interaction Days and crew interaction activities aboard ISS, and 3) special handling requirements for mini-lab transport to and from Houston and to and from ISS, as specified on the Flight Configuration Agreement.
3. Preparing the Mini-Laboratory for Flight
Results of Flight Safety Review
NanoRacks provided the data contained on the Experiment Details Confirmation Form – Flight Safety Review to NASA Toxicology for all 24 experiments flying on SpX-7. The results of Flight Safety Review:
STATUS OF MISSION 7 FLIGHT SAFETY REVIEW: COMPLETE
Mini-Laboratory Kits Shipped to the M7 Communities
Re-flight kits were shipped to the M7 communities in preparation for a re-launch. However, some teams have loaded and shipped their flight and ground truth mini-labs in preparation for a previously scheduled launch date and re-fresh kits will be provided to those teams as necessary.
Loading Experiment Samples into the Mini-Laboratory
Each flight experiment team will load their samples into the flight and ground truth mini-laboratories at the same time and ship the flight mini-lab to NanoRacks in Houston for incorporation in the SSEP payload. The students will be loading the samples into the actual flight hardware that will fly aboard the International Space Station, and no-one else will have access to the samples after the students have sealed the mini-laboratory. To help the teams with the loading process, NanoRacks has created instructional videos that are available in the SSEP Document Library. The teams are urged to study these videos carefully and practice loading samples (or dummy versions of samples) into the device to make sure everything will go smoothly when they prepare the actual flight and ground truth mini-labs. NanoRacks also offers, and strongly encourages, a loading/shipping videoconference between flight teams and a NanoRacks staff member. During the call, the NanoRacks staffer will walk the student flight team through the entire loading and packaging process, answering questions and providing detailed guidance for each step.
Critical notes:
- What is loaded into the mini-lab must precisely reflect what is specified on the approved and signed Flight Configuration Agreement or NanoRacks will not accept the mini-lab for flight, and the flight opportunity will be forfeit.
- Student flight teams must ship the complete, flight-ready mini-laboratory. NanoRacks will not add any samples to the mini-laboratory in Houston. Once NanoRacks receives the mini-lab, they will heat-seal level 2 and 3 containment bags around the mini-lab, and incorporate it into the SSEP payload. Shipping of samples that are not inside the flight-ready mini-laboratory will lead to forfeit of the flight opportunity.
- Student teams are required to view the loading videos in the SSEP Document Library prior to loading samples into the mini-labs. In addition, teams are STRONGLY encouraged to participate in the NanoRacks loading videoconference. Teams must pay particular attention to the proper torquing of the screw in one end cap, the orientation of the clamps when placed on the tube, and the appropriate tightening of zip-ties. What might appear to be straight-forward handling/loading procedures if not done properly can cause leaking, difficulty for NanoRacks to load the mini-lab into the SSEP Mission 7 Odyssey payload box (due to wrong clamp orientation), and other anomalies that could result in mini-lab failure. If there is a mini-lab failure, and it is determined by NanoRacks as due to improper loading, NanoRacks can refuse a re-flight. If the team did participate in a NanoRacks loading videoconference, NanoRacks will have more information regarding the loading procedures of your team, and can evaluate any anomalies more effectively.
4. Planning for Return Shipping: Required Materials and What You Should Include with Your Shipment of the Flight-Ready Mini-Laboratory to Houston
Before a student flight experiment team ships their flight-ready mini-lab to NanoRacks, they need to formulate their plan for the return of their mini-lab after flight.
Supplies for Special Handling During Return Shipping
If a student team is requesting any special handling of their samples during return shipping, such as shipping the samples with cold packs, the necessary materials must be sent to NanoRacks before the SSEP payload returns to Earth. It is easiest to do this by including the supplies with the original shipment of the flight-ready mini-laboratory. For example, if the team wants to use a special shipping container for the return shipment and include cold packs in the package, the team must send the container and the cold packs so they are ready to be used as soon as NanoRacks receives the SSEP payload after the flight. Please note, if the team is shipping with cold packs a special container must also be used. Placing cold packs in a box or other non-insulated container will not maintain refrigeration during shipping and your mini-lab will likely arrive warm in Houston. The necessary supplies must be available when NanoRacks is ready to ship the mini-lab back to the team or the return shipment will be made without the supplies. If the original shipment is sent refrigerated with cold packs, the same cold packs can be used for the return shipment; there is no need to send a second set, as long as the cold packs can be reused.
PREPAID FedEx Airbill for Return Shipping
If your flight experiment team wants the mini-laboratory shipped back to them after the flight (which has been the case for nearly every SSEP experiment since program inception), you must mail to NCESSE a prepaid and completed FedEx air bill for return shipping. NCESSE will review each air bill for prepayment and completeness, and then ship all Mission 7 air bills to NanoRacks. NanoRacks cannot return your mini-lab without a return air bill. Do not include your pre-paid air air bill in your mini-lab shipment to NanoRacks in Houston.
We strongly encourage teams to ship the PREPAID FedEx air bill to NCESSE at the same time the flight experiment is shipped to NanoRacks in Houston for flight. The team may choose to wait until closer to the return of the SSEP payload to Earth before sending their prepaid air bill to NCESSE, but all air bills must be in hand at NCESSE AT LEAST 2 weeks before the payload is scheduled for return to Earth.
The teams are advised to make sure to provide all required information, such as:
- The address to which the mini-laboratory is to be sent after the flight. Note that NanoRacks encourages return shipment to a business/school address and not a home address to ensure that the package is not left unattended on a doorstep in the event someone is not home at the time of delivery.
- Sender’s address: NanoRacks’ address in Houston (see Section 5 below).
- Choice of delivery speed (overnight highly recommended).
- Choice of Saturday delivery, if appropriate, given the delivery speed chosen. Note that there is usually an extra charge for Saturday delivery.
- Request for signature upon delivery to make sure the package is not left unattended on a doorstep. This is especially important if the package is delivered to a residential address.
- The FedEx return air bill must be prepaid, either using a FedEx account number (i.e., the school district’s) or a credit card. If paying by credit card the following information must be provided: the credit card number, name on the card, billing zip code, the 3-digit CSV code on the back of the card, and the expiration date. Details for return shipping options can be found on the FedEx web site http://www.fedex.com/us/return-solutions/return-label-options/.
Important note: NanoRacks cannot send back the flight mini-lab to the student team without a prepaid and fully completed airbill (unless the team is picking up the mini-laboratory in person after the flight.)
Ship the completed and prepaid FedEx Airbill to:
Stacy Hamel
SSEP Flight Operations Manager
NCESSE
26 Nahor Drive
Palmyra, VA 22963
5. Shipping the Mini-Laboratory to NanoRacks
Your flight-ready mini-laboratory must be sent to NanoRacks in Houston using FedEx, and DO NOT request a signature for delivery. Your mini-laboratory cannot arrive in Houston sooner than Wednesday, March 2, 2016, and cannot arrive later than Thursday, March 17, 2016.
Note regarding Saturday delivery: NanoRacks staff will not be on site to accept the package if it arrives on Saturday. Note that the package is being dropped off at a secure facility, so that Saturday delivery is fine if there are no impacted special handling requirements. For example, if you have need for refrigeration, and the package arrives on Saturday, cold packs you shipped with the mini-lab may be exhausted before staff return on Monday. Also note that if you accidentally request signature on delivery, and the package arrives on a Saturday, the package will be placed back on the FedEx truck and might not be re-delivered for a few days. Also note that FedEx does not deliver on Sunday. Work with FedEx so that your package is delivered in compliance with these requirements and constraints. Note: if your package is being delivered on a Saturday, please send an email to Stacy Hamel (stacyhamel@ncesse.org) and let us know.
Important note – missing the deadline: If your flight mini-lab is not delivered by the March 17, 2016, deadline (for whatever reason), it will lead to the loss of the experiment slot and flight opportunity.
Important requirements:
- A copy of the Flight Configuration Agreement, the signed and final Experiment Details Confirmation Form – Flight Configuration and a copy of the completed Handover Checklist, MUST be included in the shipping box.
- All packages must be sent using FedEx. Be sure to write down the tracking number for your package and DO NOT request a signature on delivery.
- Once you ship your flight mini-lab to NanoRacks in Houston, please send an email to Stacy Hamel (stacyhamel@ncesse.org) with the FedEx tracking number so that NCESSE and NanoRacks have the ability to track the package. Note that if you use the FedEx website to print your shipping label, in the “E-mail Notifications” section you can specify that emails tracking the progress of the package along the route are automatically sent to you, and you can specify that these emails should also be sent to Stacy Hamel.
Ship your flight mini-lab to:
NanoRacks, LLC
Attn: SSEP Mission Integration (Patrick Sinnott)
555 Forge River Road
Suite 120
Webster, TX 77598
281-899-0798
Dropping Off the Mini-Laboratory in Person
Instead of shipping the mini-laboratory using FedEx, the student experiment team also has the option of dropping off their mini-lab in person in Houston. This is considered a special handling requirement and must be requested in advance using the Experiment Details Confirmation Form – Flight Configuration (see Section 2 above.) Where and when to drop off the mini-lab will be provided to those teams who have requested this option after the Form has been completed and approved.
Incorporating the Mini-Laboratory into the SSEP Payload
Once NanoRacks receives your mini-laboratory, they will log receipt of the shipment and store the mini-lab in the SSEP payload processing facility until it is incorporated into the payload. During this time, there are two choices for the temperature in which the mini-laboratory is stored: 1) storage at room temperature (21-24ºC; 70-74ºF), or 2) storage in a standard refrigerator temperature (2-4°C; 36-39°F). If the team wants their mini-lab refrigerated, this must be brought to the attention of NanoRacks through the Special Handling section of the Experiment Details Confirmation Form – Flight Configuration (see Section 2 above). The SSEP payload processing facility will have copies of this form, they will match it to the copy you included in your mini-lab shipment, and on arrival, each mini-lab will be assessed as to whether there are special handling requirements that need to be implemented. Any instructions written on or inside the shipping package that are not included on the Flight Configuration Agreement will be ignored. During payload processing, NanoRacks will heat-seal level 2 and 3 containment bags around each mini-laboratory (in a way that will not raise the temperature inside it), and load it into the SSEP payload. NanoRacks will turn over the payload to NASA for transportation to the launch site and vehicle integration.
6. Transport of the SSEP Payload from Houston to the International Space Station
After the individual mini-laboratories are incorporated into the SSEP M7 payload, the entire payload is handed over to NASA where it will be placed in a cold bag to keep it refrigerated until arrival at ISS.
7. Operations Aboard the International Space Station
The SSEP payload is expected to be delivered to the International Space Station 2-3 days after launch. The payload will return to Earth on SpaceX-8 Dragon, which is scheduled to undock from the station and return to Earth on May 11, 2016.
Experiment Timeline on the Station
The timeline aboard ISS for handling each team’s mini-laboratory is defined in the Experiment Details Confirmation Form – Flight Configuration (see Section 2 above). NanoRacks will incorporate the Crew Interaction Days and specific crew interactions, as specified on the approved Form for each mini-laboratory, into a master schedule to be followed by astronauts on orbit. The student flight team can only ask for crew interactions with their experiment during the five scheduled Crew Interaction Days. For more information about the way the student teams can specify handling of their experiment aboard ISS, see the section titled: “4. Mixing the Experiment Samples in the FME Once in Orbit, and Astronaut Handling” on the SSEP Mission 7 to ISS: Mini-Laboratory Operation page. Note that the timeline for each experiment will be reassessed once the exact dates for arrival at and departure from ISS, as well as the overall ISS crew schedule, are known. Therefore, the timelines for all experiments remain tentative until they are incorporated into the final ISS work schedule.
Updates to Student Teams on the Progress of Their Experiment
Astronauts will work with the SSEP payload at times of the day that fit best in their overall work schedule. Even though crew interactions with the experiments are to take place on pre-specified Crew Interaction Days, the time of interaction can vary from one Crew Interaction day to the next. While the SSEP program team may know the astronauts’ planned work schedule a few days in advance, we’ll not know exactly when the payload is handled until the task is complete. After the astronauts have completed handling of the SSEP payload, NanoRacks will forward a report on the activity to the SSEP program team at NCESSE, and we will then post the details – including the time at which the payload was handled – on the SSEP Mission 7 to ISS: Experiment Log page to make the information available to all student teams as quickly as possible. The report will be posted as soon as it is received, but it may take up to 24 hours for the information from the International Space Station to make its way to the Log. That means, for example, that the details of an activity conducted by the astronauts on the afternoon of a specified Crew Interaction Day will be posted on the Experiment Log no later than the afternoon of the following day (and likely far sooner than that).
8. Conducting the Ground Truth Experiments
Ground truth experiments – the control versions of the experiment conducted on Earth while the microgravity experiment is being conducted in orbit – are an essential part of analyzing the results of the flight experiment. Once the flight experiment returns to Earth, simultaneous harvesting and analysis of both the flight experiment and the ground truth experiments allows the research team to assess the role of gravity in the physical, chemical, or biological system under study. It is hard to imagine how the role of gravity can be determined without ground truth experiments conducted at the same time as the flight experiment.
However, given that it may take up to a day to receive a report on exactly what time of day a specific activity was conducted with an experiment aboard the ISS, the student team may want to shift activities with their ground truth experiments by 1 day (24 hours). That will allow teams to ensure that the timing of activities they carry out on their ground truth experiments accurately reflects the timing of activities with their experiment aboard the station. This is especially important for experiments that are sensitive to exact timing. For example, if a microbiological experiment is likely to produce different results depending on whether it is active for 40 or 50 hours, the teams will want to match the exact timing of the experiment aboard the station with their ground truth experiment.
9. Receiving the Mini-Laboratory After the Flight
The SSEP payload is scheduled to return to Earth aboard SpaceX-8 Dragon on May 11, 2016. Dragon splashes down in the Pacific off the California coast, and is then transported by ship back to California where the payload is removed and turned over to NanoRacks. NanoRacks will then transport the payload back to Houston. NanoRacks will process the payload as quickly as possible, so that mini-labs will be ready for shipping to the student flight teams 57-72 hours after landing. A student team representative can pick up the mini-laboratory in person in Houston, or NanoRacks can ship the mini-lab back to the student team.
Shipping Mini-Laboratories Back to Student Teams
A student flight team that wants their mini-laboratory shipped back to them must have sent a prepaid return FedEx airbill to NCESSE (see Section 4). NanoRacks will use the airbill and any special handling materials provided by the team to ship the mini-lab as soon as possible. Shipping will be done as per special handling requirements defined by the student flight team in the Experiment Details Confirmation Form – Flight Configuration (see Section 2 above.) Remember that if a team is requesting any special handling of their samples during return shipping (such as shipping the samples with cold packs), the necessary supplies must also be sent to NanoRacks before the SSEP payload returns to Earth. This is accomplished easiest by including the supplies with the original shipment of the flight-ready mini-laboratory. If the necessary supplies are not available when NanoRacks is ready to ship the FME back to the team, the return shipment will be made without the supplies.
Picking up the Mini-Laboratory in Person
Instead of having the mini-laboratory returned using FedEx, the student experiment team has the option of picking up their mini-lab in person in Houston. This is considered a special handling requirement and must be requested in advance using the Flight Experiment Details Confirmation Form – Flight Configuration (see Section 2 above.) The specifics of where and when to pick up the mini-lab in person will be provided to those teams that have requested this option, once the return date and time for the SSEP payload to Houston has been confirmed.
The Student Spaceflight Experiments Program (SSEP) is a program of the National Center for Earth and Space Science Education (NCESSE) in the U.S., and the Arthur C. Clarke Institute for Space Education internationally. It is enabled through a strategic partnership with NanoRacks LLC, working with NASA under a Space Act Agreement as part of the utilization of the International Space Station as a National Laboratory. SSEP is the first pre-college STEM education program that is both a U.S. national initiative and implemented as an on-orbit commercial space venture.
The Smithsonian National Air and Space Museum, Center for the Advancement of Science in Space (CASIS), and Subaru of America, Inc., are National Partners on the Student Spaceflight Experiments Program.