All information added or updated since this page first went up on March 12, 2012, is in GREEN TEXT below.
Information still to be determined (if any) is in RED TEXT below.
Dates and times that are subject to change at NASA’s discretion are in PURPLE TEXT below.
Last update of this page: August 23, 2012, 11:30 am ET
This page provides all the information you need regarding the mini-laboratory used for experiments on SSEP Mission 2 to ISS—the NanoRacks Fluids Mixing Enclosure (FME), which NanoRacks has also dubbed a “MixStik”. Here you will find all the specifications for the mini-lab, a description of its straightforward operation, and all the constraints on your experimental design, including constraints due to the time it takes from submission of your experiment, to arrival and operation on ISS, to return to Earth.
Before reading this page, be sure to read the Designing the Flight Experiment page. It will help you understand how to start thinking about a possible experiment.
1. Introduction to the FME Mini-Lab
The FME is a very simple mini-laboratory designed to carry small samples of fluids and solids—the Experiment Samples—and provides for the samples to be mixed at an appropriate time in orbit. This allows you to explore the effects of microgravity on a physical, chemical, or biological system contained in the mini-lab. Each mini-lab is a cylindrical tube 6.75 inches long (17.1 cm), with an outer diameter of 0.5 inches (1.3 cm). It can contain one, two, or three separate volumes of fluids and/or solids. You can think of the FME as one, two, or three small test tubes that can be mixed in orbit. Figure 1 provides a graphic showing the design of an FME which contains 3 separate volumes. Download Figure 1 as a pdf
Each flight experiment for SSEP Mission 2 to ISS must be designed for operation in a FME. The SSEP payload to the International Space Station will contain one FME for each flight experiment. The FMEs will be placed in a Payload Box which can contain up to 24 FMEs (see Figure 2). SSEP flight experiments will share the Payload Box with flight experiments from professional researchers in academia, industry, and government. NanoRacks has the ability to fly multiple Payload Boxes to accommodate a payload of more than 24 FMEs. Once in orbit, the Payload Box is placed in a rack on Kibo—the Japanese Experiment module (JEM) on ISS.
2. Operating the FME Mini-Lab
The largest volume in the FME containing fluids and/or solids—the Main Volume— runs along the length of the tube. Up to two sealed cylindrical glass Ampoules (vials), each capable of containing additional fluids and solids, can be placed inside the Main Volume, and are therefore bathed in the fluid contained in the Main Volume. At a prescribed time, an astronaut can bend the flexible FME over a specific Ampoule, cracking open the Ampoule and allowing the Ampoule’s contents to mix with the contents of the Main Volume. You can expect the ampoule to break into a few observable glass pieces. Once an Ampoule is broken, shaking the FME will enhance mixing.
There are three types of FMEs depending on how many different ‘test tubes’ your experiment will need—
Type 1 FME: contains only 1 experiment sample in the Main Volume, with no inserted glass ampoules. An experiment using a Type 1 FME by definition requires no mixing.
Type 2 FME: contains 2 experiment samples, one in the Main Volume and a second in a Long Ampoule. Figure 3 provides a graphic of a Type 2 FME. Download Figure 3 as a pdf
Type 3 FME: contains 3 experiment samples, one in the Main Volume and two additional samples in two Short Ampoules—Ampoule A and Ampoule B. Figure 1 provides a graphic of a Type 3 FME. Download Figure 1 as a pdf
- A volume containing a fluid does not need to be completely filled. Air voids are fine.
- The FME should not be heat sterilized using, e.g., an autoclave. The tube containing the Main Volume will likely not withstand temperatures up to 250ºF (120ºC). Sterilization should be done by gas, radiation, or chemicals.
3. Fluids Mixing Enclosure (FME) Kits – You Get the Real Flight Hardware and Load It for Flight to ISS
As part of the Baseline Program Cost, each participating community will receive a package of five Fluids Mixing Enclosure (FME) Kits, each Kit providing all the parts for the assembly and loading of a flight certified Type 1, Type 2, or Type 3 FME.
Each FME Kit provides the ACTUAL flight hardware. Each experiment selected for flight will be conducted in an FME that the student team assembles from one of their Kits, loads, seals, and ships or hand-carries to NanoRacks in Houston for flight on the ISS. When NanoRacks receives your FME, they will heat seal two polyethylene bags around it to serve as a second and third level of containment (see Section 6 below), load it in the Payload Box, and deliver the entire payload to NASA for integration into the launch vehicle.
On return to Earth, the sealed FME will be shipped back to you, or provided to your team’s representative in Houston. Once received, the student team conducts their own harvesting of the samples from the FME and analysis of the samples.
This approach allows students to get broad experience in all aspects of their experiment design and operation, and there is no third-party handling of the experiment samples before they are sealed in the FME destined for space. The other four FME Kits can be used by your community to demonstrate and assess the operation of the FME mini-lab, design and refine experiments, and conduct formal ground truth experiments while the flight experiment is ongoing.The FME Kit is therefore also an exceptional experiment design tool, providing an understanding of precisely how well an experiment works with the mini-lab to be used on ISS.
While experiments that are being proposed as part of the community-wide design competition most likely can be tested using standard laboratory test tubes and mixing protocols, the selected flight experiment should likely be assessed and refined using an actual FME, before the flight FME is loaded and shipped to Houston. If a participating community would like more than 5 FME Kits, they are available as packages of five Kits for an additional cost.
Important note: NanoRacks has created PDF and video files with detailed instructions for assembling, loading, and sealing the FME. These documents are available for download from the Document Library.
4. Mixing the Experiment Samples in the FME Once in Orbit, and Astronaut Handling
To mix samples in the FME, the glass ampoule is cracked open by flexing the FME like you would activate a glow stick. Each FME is self-contained, allowing each student flight experiment team to define when mixing is to take place for their experiment, which can require up to two interventions by an ISS crew member in the case of a Type 3 FME containing two glass ampoules. Note, however, that to ensure consistency with crew schedules, NanoRacks will define eight days during the time the SSEP payload is aboard the space station for crew interaction with the FMEs. Student flight experiment teams are able to choose the days that fit best their experiment design for the astronauts to manipulate the FMEs. It is also possible to define other actions by the astronaut assigned to the SSEP payload besides breaking the ampoules. For example, you can request the FME to be shaken at appropriate times.
Scheduled Crew Interaction Days for Mission 2 to ISS
For the dates listed below, A=0 is the Time of Arrival, when the SSEP experiments payload is brought from the ferry vehicle through the hatch on ISS, and D=0 is the Time of Departure, when the payload is moved through the hatch on ISS and loaded onto the ferry vehicle for return to Earth.
|1||on arrival at ISS||A=0|
|2||during first week||A+1|
|3||during first week||A+4|
|4||3 weeks prior to departure||D-21|
|5||2 weeks prior to departure||D-14|
|6||2 weeks prior to departure||D-12|
|7||in week prior to departure||D-5|
|8||in week prior to departure||D-2|
Important note on adjustments to scheduled crew interaction days: ISS astronauts do not have tasks scheduled on weekends. The above schedule will require adjustment if any of the interaction days above fall on a weekend.
Important note on the duration of your experiment: the timeline of events from handover of your FME to NanoRacks in Houston, through its return to you after its flight in space, implies that most experiments will need to be in a dormant (inactive) state until arrival on ISS (see Section 6 below for constraints imposed by the timeline). The experiment can then be initiated by an astronaut by cracking an ampoule to perform the first mix. If your experiment is inactive until initiated with a first mix, then your experiment can be initiated at the specific Crew Interaction Day you choose while it is on ISS. This gives you the latitude to define how long your experiment should proceed in microgravity before de-orbiting and returning to Earth. For example, if you only want your experiment to run for three days on ISS, you can choose Crew Interaction Days that are three days apart. If you want your experiment to run roughly three weeks, have it initiated on a Crew Interaction Day that gives you a roughly three-week run time for your experiment. The mixing protocol is up to you, and it is independent of any other FME experiment being performed.
5. Ways to Think About Using the Different Types of FMEs—Some Examples
There are countless experiments that can be done in the FME mini-lab. To gain an understanding of the kinds of experiments possible in microgravity, first read the Designing the Flight Experiment page, and then the Microgravity Science Background and Microgravity Experiment Case Studies documents available for download at the Document Library. Here are a few practical applications of the FME mini-lab to microgravity experiments—
A Type 2 FME: provides an excellent protocol for a significant class of biological experiments. A dormant organism (e.g., freeze-dried bacteria or cells) could be placed in the Long Ampoule or even a single Short Ampoule. A suitable growth medium could be placed in the Main Volume. Once in orbit on ISS, the ampoule is cracked and the experiment is initiated. As one example, the Type 2 FME is perfectly suited for an experiment exploring how a seed will germinate in microgravity. The dry seed or seeds can be placed in the ampoule in cotton to wick the growth medium when the ampoule is cracked.
A Type 3 FME: is suitable for any experiment that requires three separate samples to be brought together. One example might a biological experiment that explores whether generations of microorganisms produced entirely in microgravity have any structural differences relative to those cultured on Earth. Given that the time for each generation can be very short, even just the 1-2 days of exposure to gravity from the time the payload returns to Earth until the FME is received by the student team, may result in a situation where the living generation was produced entirely in a gravity environment. The experiment team might therefore want to introduce a biological fixative to kill the biology, or a growth inhibitor to greatly slow the biology, before the FME is brought back to Earth and re-introduced into a gravity environment. The fixative or inhibitor could be placed in Ampoule B and the ampoule cracked before de-orbit of the FME. For more information, read the Using Biologicals in SSEP Experiments: Dormant Forms, Fixatives and Growth Inhibitors document downloadable at the Document Library.
A Type 1 FME: provides a self-contained microgravity environment for an experiment that is ‘pre-loaded’ before launch, and requires no mixing of sample materials once in orbit. It may be that just exposure to microgravity is the trigger for the experiment.
Note on the importance of Ground Truth Experiments: a ground truth experiment is one that is identical to the experiment in orbit, except it is conducted on the ground, and at the same time the experiment is conducted in orbit. This allows the student team to do a direct comparison of the flight and ground truth experiments to assess differences due to the apparent removal of gravity on orbit. A ground truth experiment is almost always a vital element of microgravity experiment design given that the purpose of such experiments is to assess the impact of removing gravity from a physical, chemical or biological system. To make such an assessment requires a comparison against a ground truth experiment that was initiated at the same time as the flight experiment. In addition, an experiment team should consider conducting multiple ground truth experiments, since this is straightforward to do, and provides more data that can be used to define an average behavior on the ground.
A ground truth is also vital in the case of an experiment that is not terminated on orbit using e.g., a biological fixative or growth inhibitor. Such an experiment will likely continue after its return to Earth, and re-exposure to normal gravity can ‘contaminate’ the results. But the duration of the experiment on ISS may be substantially longer than the up to 2 days of exposure to gravity before you receive the FME (due to landing, transport back to Houston, and possible FedExing to you). The experiment will have been carried out mostly in microgravity, but also with a short exposure time to gravity. Comparison to a ground truth allows you to assess differences due to the microgravity exposure.
6. Critical Experimental Design Constraints
Just like a professional researcher using a pre-existing laboratory or lab apparatus, you need to design your experiment to the constraints imposed by the equipment you are using and the environment in which it is to operate. Listed below are the critical design constraints you need to consider for: the Experiment Samples allowed; the FME and its operation on ISS; and how long it will take: 1) from receipt of your FME by NanoRacks in Houston to the time it arrives at ISS, and 2) from your FME’s departure from ISS until it is received by you.
6.1 Experiment Samples—Restrictions on the Fluids and Solids That You Can Use in Your Experiment
Each SSEP experiment selected for flight must pass a NASA Flight Safety Review. The review is conducted by NASA Toxicology at Johnson Space Center, and is meant to ensure that the fluids and solid materials to be used in the experiment—the Experiment Samples—pose no risk to the astronaut crew. The level of risk depends on the toxicity of the experiment samples AND how well they are contained in the mini-lab. The more “levels of containment” that are engineered into the mini-lab, the less the restrictions on the experiment samples. For each SSEP flight opportunity, NCESSE and NanoRacks work hard to ensure a high probability that each of the experiments passes Flight Safety Review. This is done by assessing the safety features engineered into the mini-lab to be used, and what restrictions this assessment imposes on allowable experiment samples.
As a benchmark of success, all of the 42 SSEP experiments selected for flight on the first 3 SSEP flight opportunities (SSEP on Shuttles Endeavour and Atlantis, and SSEP Mission 1 to ISS) passed Flight Safety Review and flew. However, it is important to note that the final decision on whether an experiment passes the Review is NASA’s and out of the control of NCESSE and NanoRacks.
For SSEP Mission 2 to ISS, the FME mini-lab has three nested and sealed enclosures surrounding the fluids and solids (see Figures 1 and 3) to guard against an accidental release into the crew cabin. The FME is said to have three levels of containment, and this provides so much redundancy against an accident that virtually any fluids and solids can be used by a student team. However, the following are requirements regarding the fluids and solids used in the FME mini-lab:
a. Restricted Samples: Student teams must NOT use any of the following fluids and solids. A finalist proposal submitted to NCESSE that contains any of the substances listed below will be rejected automatically and will not move forward to the Step 2 Review Board for review.
radioactive fluids or solids
These are the only fluids and solids that NanoRacks has stated cannot be used. However, since NanoRacks and NASA reserve the right to refuse other substances or items not included in the list above based on their safety review, you are advised to consider carefully how hazardous are the samples you are planning to use, even if they are not included in the list of prohibited samples above. If your experiment is making use of something that is known to be hazardous, NCESSE advises you to alert us as soon as possible so that we can have NanoRacks assess the hazard and any potential impact on NASA Flight Safety Review.
b. Human Samples: All human samples, such as blood, will need to be tested for Hepatitis B, Hepatitis C, HIV-1, HIV-2, HTLV-1, and HTLV-2. Before the selection of an experiment using human samples can be confirmed, the team must provide to NCESSE a certification letter from the sample vendor stating that tests for the presence of these viruses in the sample to be used for the flight experiment have been conducted, and the sample is free of the viruses listed above. If a vendor cannot provide the certification, the student team must arrange for these tests to be conducted in a medical laboratory, which can then provide the required certification letter.
c. Material Safety Data Sheets: Each student team is required to provide a standard Material Safety Data Sheet (MSDS) for each of their experiment samples (fluids and/or solids). An MSDS is often available from the vendor from which you purchase the sample as a downloadable PDF file. For those samples where an MSDS is not typically provided by the vendor, e.g., Tilapia fish eggs, NCESSE will provide the team the necessary guidance to submit the needed safety paperwork without undue burden. The MSDSs need not be provided when the proposals are sent for review, but they must be made available before the selection of an experiment for flight can be confirmed.
d. Specificity of Samples: Before the selection of an experiment for flight can be confirmed, each flight experiment team must provide a list of their samples with the level of specificity described in the document Required Specificity for Description of Experiment Samples, which is available for download in the Documents Library.
6.2 FME Volumes for Fluids and Solids
The FME is a mini-laboratory, which means the volumes for experimental samples are small. So be sure you design an experiment with the specifications below in mind.
Type 1 FME:
Main Volume: 11.31 ml; this corresponds to a cubical volume 2.24 cm on a side
Type 2 FME:
Main Volume: 6.28 ml; this corresponds to a cubical volume 1.84 cm on a side
Long Ampoule: 1.85 ml; this corresponds to a cubical volume 1.23 cm on a side; inner diameter: 0.16″ (4.064 mm), length: 6.5″ (165 mm)
Type 3 FME:
Main Volume: 6.28 ml; this corresponds to a cubical volume 1.84 cm on a side
Ampoule A and B: each are 0.92 ml; this corresponds to a cubical volume 0.97 cm on a side; inner diameter: 0.16″ (4.064 mm), length: 3.2″ (81 mm)
6.3 Constraints Due to the Flight Timeline for SSEP Mission 2 to ISS
Important constraints on the design of your experiment are associated with the timeline from turnover of your flight FME to NanoRacks in Houston, to when it arrives back in Houston after its flight in space. While the milestones listed below remain tentative until NASA sets precise launch and landing dates for the ferry vehicles to and from the ISS, the milestones make it possible for the student proposing teams to design their experiment with the mission timeline in mind.
The relevant critical milestones for the mission timeline for SSEP Mission 2 to ISS—
- Deadline for NanoRacks in Houston to receive your flight FME: Launch minus 4 weeks
- Handover of the SSEP Payload to NASA: Launch minus approximately 3 weeks
- SSEP payload is placed aboard the ferry vehicle: Launch minus 10 days or less
- Target launch date for SSEP Payload to ISS: October 7, 2012
- Payload transferred to ISS: Launch plus approximately 3 days
- Payload transferred from ISS to ferry vehicle; spacecraft undocking and landing: Aim is for Launch plus approximately 6 weeks
- Your FME is ready for pickup in Houston or for FedExing to you overnight: Landing + (24 to 48) hours
These dates lead to the following conclusions:
a. it will take about 4.5 weeks from the time you give your flight FME to NanoRacks to the time it arrives at ISS
b. it will be on ISS for approximately 6 weeks before being transferred to the return vehicle, and the vehicle undocks for return to Earth
c. it will be 24 to 48 hours from the time the ferry vehicle undocks from ISS to when your FME is ready for pick up in Houston (or FedExing to you)
d. it will be about 10 weeks from the time you give your FME to NanoRacks in Houston to it being ready for pickup in Houston (or FedExing to you) after its return from space
These conclusions likely lead to the following constraints on your experiment design:
a. Your experiment likely needs to be in stasis (in a dormant or inactive state) until it arrives on ISS. For example, if you are using biological samples, they need to be dormant until the experiment is initiatied on ISS. Some examples of dormant biological samples include: seeds; dehydrated macroscopic organisms and eggs such as brine shrimp eggs; and hundreds of freeze-dried microscopic organisms like bacteria and cells—all of which are commercially available. If the dormant biological sample is placed in an ampoule in the FME, the experiment can be initiated by an astronaut on ISS by cracking the ampoule and mixing the sample with a rehydration or nutrient fluid contained in the Main Volume of the FME.
b. Dormant samples may benefit from refrigeration during transport of your flight FME from you to Houston and on to ISS. NanoRacks is arranging refrigeration for transportation of the FMEs from the moment your flight-ready FME arrives at NanoRacks to when it reaches the ISS.
At this time, NASA reports that there is no reliable refrigeration aboard the ISS.
c. Prior to the transfer of your FME to the ferry vehicle for return to Earth, and its re-introduction to a gravity environment for nearly a day before you receive it in Houston (two days – or more – if FedEx overnight shipping is required from Houston to you), you might want to terminate a biological experiment by introducing either a “fixative” which kills and preserves the biology, or by introducing a growth inhibitor which dramatically slows biological activity. This can be done in a Type 3 FME with a fixative or inhibitor in Ampoule B, which can be cracked before the FME leaves ISS. For more information, read the document Using Biologicals in SSEP Experiments: Dormant Forms, Fixatives and Growth Inhibitors in the Document Library.
6.4 Thermal (Temperature) Control
There is no active temperature control within the FME. Unless you are requesting external temperature control, such as placing your FME in a refrigerator, you should expect the FME to be subjected to whatever the ambient temperature conditions might be along its route from handover of your FME to NanoRacks in Houston to return of your FME after its flight in space. While aboard ISS, you should expect the ambient conditions of the crew cabin, with a temperature of 21-24ºC (70-75°F)—a shirtsleeve environment.
SSEP is meant to offer real experiment opportunities on ISS that are interdisciplinary, and at the grade 5-12 level, intersect the science curriculum across the physical science, earth/space science, and biological science strands. That said, SSEP experiments are exceptionally well suited to biology, as long as biological samples can be maintained in a relatively dormant state until reaching ISS. While many biologicals can be kept in a dormant state at room temperature, some of them require refrigeration at a temperature of 2-8ºC. We are therefore working with NanoRacks to arrange refrigeration of the SSEP payload over much of your FME’s journey, including the following legs (unless otherwise noted):
a. shipping of your FME from you to NanoRacks in Houston: you can ship with cold packs
b. NanoRacks storage of your FME until handover to NASA: teams can request their FMEs to be refrigerated (at approximately 2-4ºC)
c. NASA receiving your FME through loading aboard the ferry vehicle, launch, and transfer to ISS: NanoRacks has made arrangements for refrigeration on this leg.
IMPORTANT NOTE: during transport of the payload to the launch site, loading aboard the ferry vehicle, launch, and through arrival at the ISS, if any FME mini-lab requires refrigeration then the entire SSEP payload of mini-labs will be refrigerated.
d. aboard ISS over the 6 weeks your FME will be aboard ISS: NASA reports that reliable refrigeration is not available. Student teams must not count on refrigeration aboard ISS.
e. from loading aboard the return ferry vehicle, to undocking, to landing, and transport to Houston (expected duration: 15-20 hours): no refrigeration available for this leg
f. shipping from NanoRacks in Houston to you: you can request your package to be shipped with cold packs
As a result of these considerations, the most successful experiment designs will not require refrigeration but are not harmed by it, either. However, since refrigeration likely will be available during transportation of the FMEs from the student teams to the ISS, experiments requesting refrigeration during transportation are considered viable. In a case where the team is requesting refrigeration during transportation, they may want to have their experiment initiated shortly after arrival at the station, given that the FMEs will likely remain in the room temperature environment of the ISS for the remainder of their stay aboard the station.
Note that for Mission 2 to ISS, the thermal controls described above are the only ones available. For example, there will be no access to an incubator aboard the ISS, nor can any of the samples be kept frozen during transportation.
6.5 Other FME Constraints
- is opaque. There is therefore no means to photograph samples once loaded.
- has no means of active data acquisition on orbit
- has no onboard light source
- has no provided power
7. Very Important Information for the Experimenter
Make sure to read the Designing the Flight Experiment page for how to think about framing an experiment, and an overview of the science that might be explored in microgravity. Make sure to read about the suite of Teacher and Student Resources. Make sure to get very familiar with the SSEP Mission 2 to ISS: Critical Timeline, and information on the student team proposal process on the Flight Experiment Design Competition page.